We make our films from inert, simple polymers - mainly polyethylene and polypropylene. They are derived from natural organic free range, cage-free, fair trade, non-GMO North American natural gas. Substances of very high concern ( SVHC ) are not a component of the feedstocks and catalysts used to make nearly all plastics. Our 100% recyclable plastic films are naturally gluten free, heavy metal HMF free, allergen free, phthalate free, contain no high fructose corn syrup, are BPA free and made without antibiotics.
We do not have slave labor and there is no slave labor in our supply chain. Seriously - we have written over 20 letters confirming we do not have slave labor in our factory in St. Louis, MO.
Just a few hysterical articles about long shot possible health risks require a letter to confirm certain substances are not in the plastic. What is most important appears to be what is not in the plastic.
If you are a customer and need one of these letters, contact us. Letters specific to compliances are issued only to customers upon request.
Here in alphabetical order is a combination glossary / list of most commonly encountered regulations along with a brief definition with links for more in-depth information.
To claim a product is allergen or sensitizer free without labeling and fully comply with the US FDA Food Allergen Labelling and Consumer Protection Act (FALCPA) and EU directive 2003/89/EC, the finished product must not contain peanuts, tree nuts, milk, eggs, wheat/gluten, fish, shellfish, sulphur dioxide and sulfites, food colors, celery, seeds, natural rubber latex monosodium glutamate (MSG) and aspartame.
What is BPA? BPA is short for Bisphenol A which is utilized as a catalyst in the manufacture of epoxy, PVC and polycarbonate resins. Bisphenol A BPA never has been and never will be a component of polyethylene resins.
For more information on BPA and other endocrine disruptors, click here
California Proposition 65
Safe Drinking Water and Toxic Enforcement Act of 1986, prop 65 was ostensibly enacted to prevent carcinogenic substances from getting into drinking water. Even though some chemicals listed were used for pigmentation of plastics and mostly phased out in the US, the scope of prop 65 continues to expand.
Chemical Abstract Services is a generic database of chemicals accumulated for over 100 years.
Each CAS Registry Number (often referred to as a CAS Number):
• Is a unique numeric identifier
• Designates only one substance
• Has no chemical significance
Learn more about a specific chemical substance here.
CFC is an abbreviation for Chlorinated Fluorocarbons. Concerns about CFC's have to do with ozone depletion. Not applicable to the manufacture of polyethylene film or polyethylene resins.
Canadian Food Inspection Agency (CFIA) approval of films and resin is practically impossible. To comply with their packaging regulations, every variation on a theme must be submitted for approval. Our 622 film has recently attained CFIA approval. Click here to view the compliance letter.
The Coalition of Northeast Governors was created in 1976 for economic development of the Northeast states, the scope was widened in 1992 to the TPCH, or Toxics in Packaging Clearinghouse.
To be a US Food and Drug Administration or FDA approved plastic for prolonged contact with food and food grade packaging, there must be a trail of letters back to the resin manufacturer with specific language regarding compliance with 21 CFR section 177.1520. In practice, this is not enforced.
We do not publish the specific language for FDA approval online for obvious reasons. Click here for the truth about FDA approval.
GMO Genetically Modified Organism
Polyethylene made from natural gas feedstocks are not made from an organism whose DNA has been modified. To determine whether a bio-based plastic such as polylactic acid (PLA) has been made from GMO corn, check with your supplier.
HMF Heavy Metal Free
To be HMF/Heavy Metal Free, a resin manufacturer must confirm that they do not intentionally add during the polymerization or formulation processes the heavy metals lead, cadmium mercury and hexavalent chromium. The total allowable combined concentration is 100 ppm to comply with CONEG, prop 65 and EU RoHS.
Kosher approval is a more rigorous standard than FDA approval. Kosher requires an annual investigation of raw materials and manufacturing practices. All pigments must be HMF heavy metal free. A certificate is issued by the local Vad Hoier. We supply copies of our certificate as requested by customers.
Melamine is a thermoset plastic, not a thermoplastic polymer. It is used mainly to make dishware.
PFOA is an additive used for making non-stick cookware. Not used for making PE plastic film.
Phthalates were once ubiquitous and used for a variety of applications. As phthalates apply to plastics, they were used as plasticizers to soften polyvinyl chloride, or PVC. Phthalates are not utilized to make polyethylene resins or film.
REACH statement a/k/a RoHS
Short for Registration, Evaluation, Authorization and Restriction of Chemicals required by the European Directive RoHS (1907/2006/EU) which went into effect on December 18, 2006. REACH or RoHS is an example of a regulation with a long reach. Any product manufactured outside the EU and shipped into the EU must comply.
The manufacturer must state that the product is not manufactured with ingredients that would intentionally add lead, cadmium, mercury, hexavalent Chromium, polybrominated biphenyls PBB, Polybrominated diphenyl ethers PBDE, chlorinated paraffin or hexabromocyclodedecane.
Substances of Very High Concern SVCH
Substances of Very High Concern SVCH are substances which may have serious and often irreversible effects on humans and the environment. See REACH.
USDA United States Department of Agriculture
There is no such thing as USDA approved plastic film.